The depth of the substance is 4 mm.

If you want, you can boost the length of the structure to 6 metres or more. To do this, it’s sufficient to attach a two-meter expansion. When choosing a drawing, pay attention to the space between the arches. This figure should be 65 cm, and that’s the most appropriate duration for the specified thickness of this material. The width of the doorways according to the maker’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to pick a location for the place. If this is done properly, you can provide yourself with a crop of fresh veggies for the whole calendar year.

The place for the future greenhouse is marked instantly at the preparation of this garden plot. To be able to melt the snow in the place of the greenhouse as soon as possible, the very best point on the site is going to be a small elevation. Furthermore, in such a place is not going to have to worry about substantial humidity as dirt and air in the building.

Assemble a polycarbonate greenhouse in a raised site – intends to take care of the best temperature inside.

If it is not feasible to put a greenhouse in an elevated place, you will need to pour a coating of fine crushed stone about 20 cm and the same layer of fertile soil to create seedbeds.

Before assembling a greenhouse on your backyard plot, you should also consider where and how this construction will be installed. To begin with, you have to pick a place for this. The greenhouse should be found at a well-lit area no less than a couple meters away from homes, barns and other structures.

The best way to Put in a greenhouse according to the Faces of the Planet

Be sure to level the dirt surface – it’s best to remove the surface. This can also get rid of weed seeds. And for simplicity of work, remove the soil in a place that is around a meter wider on both sides of the rectangle that you desire.

In addition, it is worth thinking about having a base. As producers state, today most greenhouses don’t need that, particularly if they (greenhouses) are utilized just in the spring and summer period. But, seasoned anglers still suggest making at least an elementary foundation from a pub. It is quite simple – it is enough to associate with each other using metal screws and corners four pieces of wood with a cross-section of at least 10 * 10 cm. The dimensions of such a base should be equivalent to the base of their future greenhouse.

Simple bar foundation

You could also earn a strip foundation of concrete. He is more reliable than a bar foundation, but requires more fiscal and labour expenses. Incidentally, the rainwater, which is utilised in the winter, with no and don’t do with it whatsoever.

Stages of the creation of a strip foundation: a schematic representation

Many producers advise to put in greenhouse structures without building a base. For this function, they equip the frame with specific T-shaped legs, so that the construction was firmly fixed. But, as practice shows, it is still required to construct a foundation: so and the basis will be more rigorously fixed and also the components of the basis in contact with the soil, will be kept much longer in its initial state.

The main thing is to take care of the material with specific agents to protect the wood from moisture. The substance is installed on concrete cubes that are dug into the soil. To get a six-meter structure, they want 10 pieces: four to either side and one in the center of the endings.

Before you perform the greenhouse , you have to pick the perfect spot for this. It has to be an even site, so that the framework was located evenly, without distortions. It needs to be bright and not obscured by buildings or trees.